Porosity and density measurements of sodium acetate trihydrate for thermal energy storage
Resumen: Sodium acetate trihydrate (SAT) can be used as phase change material in latent heat storage with or without utilizing supercooling. The change of density from liquid to solid state leads to formation of cavities inside the bulk SAT during solidification. Samples of SAT which had solidified from supercooled state at ambient temperature and samples which had solidified with a minimal degree supercooled were investigated. The temperature dependent densities of liquid and the two types of solid SAT were measured with a density meter and a thermomechanical analyzer. The cavities formed inside samples of solid SAT, which had solidified after a high or minimal degree of supercooling, were investigated by X-ray scanning and computer tomography. The apparent density of solid SAT depended on whether it solidified from a supercooled state or not. A sample which solidified from a supercooled liquid contained 15% cavities and had a density of 1.26¿g/cm3 at 25¿°C. SAT which had solidified with minimal supercooling contained 9% cavities and had a density of 1.34¿g/cm3 at 25¿°C. The apparent densities of the solid SAT samples were significant lower than the value of solid SAT reported in literature of 1.45¿g/cm3. The density of liquid and supercooled SAT with extra water was also determined at different temperatures.
Idioma: Inglés
DOI: 10.1016/j.applthermaleng.2017.12.052
Año: 2018
Publicado en: Applied Thermal Engineering 131 (2018), 707-714
ISSN: 1359-4311

Factor impacto JCR: 4.026 (2018)
Categ. JCR: ENGINEERING, MECHANICAL rank: 13 / 129 = 0.101 (2018) - Q1 - T1
Categ. JCR: THERMODYNAMICS rank: 7 / 60 = 0.117 (2018) - Q1 - T1
Categ. JCR: MECHANICS rank: 13 / 134 = 0.097 (2018) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 32 / 103 = 0.311 (2018) - Q2 - T1

Factor impacto SCIMAGO: 1.769 - Industrial and Manufacturing Engineering (Q1) - Energy Engineering and Power Technology (Q1)

Financiación: info:eu-repo/grantAgreement/ES/MICINN/ENE2014-57262-R
Financiación: info:eu-repo/grantAgreement/ES/MICINN/ENE2011-28269-C03-01
Tipo y forma: Artículo (PostPrint)
Área (Departamento): Área Máquinas y Motores Térmi. (Dpto. Ingeniería Mecánica)

Creative Commons Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace. No puede utilizar el material para una finalidad comercial. Si remezcla, transforma o crea a partir del material, no puede difundir el material modificado.


Exportado de SIDERAL (2019-11-26-13:43:10)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Artículos



 Registro creado el 2018-12-14, última modificación el 2019-11-26


Postprint:
 PDF
Valore este documento:

Rate this document:
1
2
3
 
(Sin ninguna reseña)