Power to Gas-biomass oxycombustion hybrid system: Energy integration and potential applications
Resumen: A promising hybridization which increases the chances of deployment of Power to Gas technology is found in the synergy with oxycombustion of biomass. This study assesses the efficiency of an energy integrated system under different sizes and potential applications. District heating and industrial processes are revealed as the most suitable potential applications for this hybrid technology. Global efficiency of the combined system may be increased through thermal energy integration. The relative increment of efficiency achieved for those designs which avoid the requirement of an air separation unit and for those which completely consumed the generated CO2, are 24.5% and 29.7% respectively. A 2 MWth district heating case study is also analysed, revealing that 81.2% of the total available heat from the PtG–oxy system could be integrated raising the global efficiency up to 78.7% at the adequate operational point. Further ‘full-fuel-cycle’ analysis will be required prior to decide the interest of the concept under a specific scenario in comparison to other available energy storage technologies.
Idioma: Inglés
DOI: 10.1016/j.apenergy.2015.10.014
Año: 2016
Publicado en: Applied Energy 167 (2016), 221-229
ISSN: 0306-2619

Factor impacto JCR: 7.182 (2016)
Categ. JCR: ENGINEERING, CHEMICAL rank: 4 / 135 = 0.03 (2016) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 6 / 92 = 0.065 (2016) - Q1 - T1

Factor impacto SCIMAGO: 3.011 - Building and Construction (Q1) - Civil and Structural Engineering (Q1) - Energy (miscellaneous) (Q1) - Nuclear Energy and Engineering (Q1) - Fuel Technology (Q1) - Management, Monitoring, Policy and Law (Q1) - Mechanical Engineering (Q1) - Energy Engineering and Power Technology (Q1)

Tipo y forma: Article (PostPrint)
Área (Departamento): Área Máquinas y Motores Térmi. (Dpto. Ingeniería Mecánica)

Creative Commons You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. You may not use the material for commercial purposes. If you remix, transform, or build upon the material, you may not distribute the modified material.


Exportado de SIDERAL (2020-11-30-07:57:54)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Articles



 Record created 2018-11-13, last modified 2020-11-30


Postprint:
 PDF
Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)