Design and manufacture of a high-temperature PEMFC and its cooling system to power a lightweight UAV for a high altitude mission
Renau, J. ; Barroso, J. (Universidad de Zaragoza) ; Lozano, A. (Universidad de Zaragoza) ; Nueno, A. ; Sánchez, F. ; Martín, J. ; Barreras, F. (Universidad de Zaragoza)
Resumen: In the present study, the optimal design of a high-temperature proton exchange membrane fuel cell (HT-PEMFC) that will be used to power an unmanned aerial vehicle (UAV) in a high altitude mission is performed. The use of PEMFCs for service ceiling above 10 km implies overcoming a number of problems caused by the harsh environmental conditions. Among them, new strategies to manage the heat generated by electrochemical reactions are needed. The maximum power required by the UAV was determined solving the aerodynamic problem, and the design of the lightweight HT-PEMFC, including its cooling system, was optimized. To perform the numerical solution of the heat transfer problem, a computational code was implemented using the EES software. The decisions adopted resulted in a 40-cells stack with an electric power above 1 kW and a weight around 3.65 kg. Besides, it is demonstrated that, for the configuration considered in the study, a passive cooling system without any additional fan system can be used to maintain the stack temperature in 160 °C.
Idioma: Inglés
DOI: 10.1016/j.ijhydene.2015.12.209
Año: 2016
Publicado en: International Journal of Hydrogen Energy 41, 43 (2016), 19702-19712
ISSN: 0360-3199
Factor impacto JCR: 3.582 (2016)
Categ. JCR: ELECTROCHEMISTRY rank: 7 / 29 = 0.241 (2016) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 28 / 92 = 0.304 (2016) - Q2 - T1
Categ. JCR: CHEMISTRY, PHYSICAL rank: 45 / 145 = 0.31 (2016) - Q2 - T1
Factor impacto SCIMAGO: 1.145 - Condensed Matter Physics (Q1) - Renewable Energy, Sustainability and the Environment (Q1) - Fuel Technology (Q1) - Energy Engineering and Power Technology (Q1)
Financiación: info:eu-repo/grantAgreement/ES/DGA/T03
Financiación: info:eu-repo/grantAgreement/ES/MINECO/ENE2012-38642-C02-01/CON
Tipo y forma: Article (PostPrint)
Área (Departamento): Área Mecánica de Fluidos (Dpto. Ciencia Tecnol.Mater.Fl.)
You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. You may not use the material for commercial purposes. If you remix, transform, or build upon the material, you may not distribute the modified material.
Exportado de SIDERAL (2020-02-21-13:30:51)
Visitas y descargas
Idioma: Inglés
DOI: 10.1016/j.ijhydene.2015.12.209
Año: 2016
Publicado en: International Journal of Hydrogen Energy 41, 43 (2016), 19702-19712
ISSN: 0360-3199
Factor impacto JCR: 3.582 (2016)
Categ. JCR: ELECTROCHEMISTRY rank: 7 / 29 = 0.241 (2016) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 28 / 92 = 0.304 (2016) - Q2 - T1
Categ. JCR: CHEMISTRY, PHYSICAL rank: 45 / 145 = 0.31 (2016) - Q2 - T1
Factor impacto SCIMAGO: 1.145 - Condensed Matter Physics (Q1) - Renewable Energy, Sustainability and the Environment (Q1) - Fuel Technology (Q1) - Energy Engineering and Power Technology (Q1)
Financiación: info:eu-repo/grantAgreement/ES/DGA/T03
Financiación: info:eu-repo/grantAgreement/ES/MINECO/ENE2012-38642-C02-01/CON
Tipo y forma: Article (PostPrint)
Área (Departamento): Área Mecánica de Fluidos (Dpto. Ciencia Tecnol.Mater.Fl.)
You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. You may not use the material for commercial purposes. If you remix, transform, or build upon the material, you may not distribute the modified material. Exportado de SIDERAL (2020-02-21-13:30:51)
Permalink:
Visitas y descargas
Este artículo se encuentra en las siguientes colecciones:
Articles
Record created 2018-05-22, last modified 2020-02-21