Heat resistance, membrane fluidity and sublethal damage in Staphylococcus aureus cells grown at different temperatures
Resumen: In this work the influence of growth temperature (10–42¿°C) on Staphylococcus aureus heat resistance was studied, and its relationship with the ability of cells to repair sublethal damages and with membrane fluidity was evaluated. Non-linear, convex from above survival curves were obtained, and therefore a special case of the Baranyi model was used to fit them. For exponential phase cells, heat resistance did not change with growth temperature in the range between 10 and 37¿°C, but cells grown at 42¿°C were significantly more resistant, showing D58 and shoulder length (sl58) values 2.5 and 4 times greater than the others, respectively. For stationary growth phase cells, an increase in growth temperature above 20¿°C resulted in an increase in D58 values, and cells grown at 42¿°C also displayed the highest D58 and sl58 values. The increased heat resistance at 58¿°C of stationary growth phase cells grown at higher temperatures was coincident with the appearance of a higher proportion of sublethally damaged cells capable of recovery and outgrowth in non-selective medium. Membrane fluidity was measured at treatment temperatures, and it was observed that those cells with more rigid membranes displayed greater heat resistance (Pearson coefficient¿=¿0.969***). Additionally, S. aureus cells whose membrane was fluidized through exposure to benzyl alcohol were notably sensitized against the action of heat, in a concentration-dependent manner. Results obtained in this research indicate that membrane physical state could be an important factor determining the survival capacity of bacterial cells to a heat treatment.
Idioma: Inglés
DOI: 10.1016/j.ijfoodmicro.2018.09.002
Año: 2019
Publicado en: INTERNATIONAL JOURNAL OF FOOD MICROBIOLOGY 289 (2019), 49-56
ISSN: 0168-1605

Factor impacto JCR: 4.187 (2019)
Categ. JCR: FOOD SCIENCE & TECHNOLOGY rank: 23 / 139 = 0.165 (2019) - Q1 - T1
Categ. JCR: MICROBIOLOGY rank: 35 / 134 = 0.261 (2019) - Q2 - T1

Factor impacto SCIMAGO: 1.364 - Food Science (Q1) - Safety, Risk, Reliability and Quality (Q1) - Microbiology (Q1) - Medicine (miscellaneous) (Q1)

Financiación: info:eu-repo/grantAgreement/ES/MINECO/AGL2015-69565-P
Tipo y forma: Artículo (PostPrint)
Área (Departamento): Área Tecnología de Alimentos (Dpto. Produc.Animal Cienc.Ali.)

Creative Commons Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace. No puede utilizar el material para una finalidad comercial. Si remezcla, transforma o crea a partir del material, no puede difundir el material modificado.


Exportado de SIDERAL (2020-07-16-09:25:41)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Artículos



 Registro creado el 2019-09-09, última modificación el 2020-07-16


Postprint:
 PDF
Valore este documento:

Rate this document:
1
2
3
 
(Sin ninguna reseña)