Optimization of Oxygen-based CFBC Technology with CO2 Capture
Financiación FP7 / Fp7 Funds
Resumen: O2GEN project was running during more than three years and it was successfully finished in January 2016. The main target was to develop the 2nd generation oxyfuel circulating fluidized bed (CFB) power plants based on higher oxygen concentrations with the aim of decreasing flue gas recirculation and the energy penalty. Remarkable advances have been achieved in Air Separation (ASU) and Compression and Purification Units (CPU) reducing significantly their energy consumption. CFB boiler concept was proposed by scaling-up from past designs. No special drawbacks were found regarding combustion, heat transfer and emissions. Finally, a process integration methodology was applied and overall efficiency was increased by heat integration. Energy penalty was reduced from 10.5 to 7.3 efficiency points. The new power plant lay-out avoids technical restrictions in the use of complex heat exchangers and facilitates the operational flexibility of the system.
Idioma: Inglés
DOI: 10.1016/j.egypro.2017.03.1200
Año: 2017
Publicado en: Energy procedia 114 (2017), 581-588
ISSN: 1876-6102

Financiación: info:eu-repo/grantAgreement/EC/FP7/295533/EU/Optimization of Oxygen-based CFBC Technology with CO2 capture/O2GEN
Tipo y forma: Article (Published version)
Área (Departamento): Área Máquinas y Motores Térmi. (Dpto. Ingeniería Mecánica)
Exportado de SIDERAL (2019-05-29-11:43:33)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
articulos



 Notice créée le 2018-04-11, modifiée le 2019-05-29


Versión publicada:
 PDF
Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)