Laser machining and in vitro assessment of wollastonite-tricalcium phosphate eutectic glasses and glass-ceramics
Resumen: Bioactivity and ingrowth of ceramic implants is commonly enhanced by a suitable interconnected porous network. In this work, the laser machining of CaSiO3-Ca3(PO4)2 biocompatible eutectic glass-ceramics and glasses was studied. For this purpose, 300 µm diameter craters were machined by using pulsed laser radiation at 532 nm with a pulsewidth in the nanosecond range. Machined samples were soaked in simulated body fluid for 2 months to assess the formation of a hydroxyapatite layer on the surface of the laser machined areas. The samples were manufactured by the laser floating zone technique using a CO2 laser. Morphology, composition and microstructure of the machined samples were described by Field Emission Scanning Electron Microscopy, Energy Dispersive X-ray Spectroscopy and micro-Raman Spectroscopy.
Idioma: Inglés
DOI: 10.3390/ma11010125
Año: 2018
Publicado en: MATERIALS 11, 1 (2018), [10 pp]
ISSN: 1996-1944

Factor impacto JCR: 2.972 (2018)
Categ. JCR: MATERIALS SCIENCE, MULTIDISCIPLINARY rank: 102 / 293 = 0.348 (2018) - Q2 - T2
Factor impacto SCIMAGO:

Tipo y forma: Article (Published version)
Área (Departamento): Área Cienc.Mater. Ingen.Metal. (Dpto. Ciencia Tecnol.Mater.Fl.)
Exportado de SIDERAL (2019-07-09-12:50:29)

Este artículo se encuentra en las siguientes colecciones:
articulos



 Notice créée le 2018-02-12, modifiée le 2019-07-09


Versión publicada:
 PDF
Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)