Biomechanical Consequences of the Elastic Properties of Dental Implant Alloys on the Supporting Bone: Finite Element Analysis
Resumen: The objective of the present study is to evaluate how the elastic properties of the fabrication material of dental implants influence peri-implant bone load transfer in terms of the magnitude and distribution of stress and deformation. A three-dimensional (3D) finite element analysis was performed; the model used was a section of mandibular bone with a single implant containing a cemented ceramic-metal crown on a titanium abutment. The following three alloys were compared: rigid (Y-TZP), conventional (Ti-6Al-4V), and hyperelastic (Ti-Nb-Zr). A 150-N static load was tested on the central fossa at 6° relative to the axial axis of the implant. The results showed no differences in the distribution of stress and deformation of the bone for any of the three types of alloys studied, mainly being concentrated at the peri-implant cortical layer. However, there were differences found in the magnitude of the stress transferred to the supporting bone, with the most rigid alloy (Y-TZP) transferring the least stress and deformation to cortical bone. We conclude that there is an effect of the fabrication material of dental implants on the magnitude of the stress and deformation transferred to peri-implant bone.
Idioma: Inglés
DOI: 10.1155/2016/1850401
Año: 2016
Publicado en: BioMed Research International 2016 (2016), 1850401 [9 pp.]
ISSN: 2314-6133

Factor impacto JCR: 2.476 (2016)
Categ. JCR: BIOTECHNOLOGY & APPLIED MICROBIOLOGY rank: 66 / 160 = 0.412 (2016) - Q2 - T2
Categ. JCR: MEDICINE, RESEARCH & EXPERIMENTAL rank: 65 / 128 = 0.508 (2016) - Q3 - T2

Factor impacto SCIMAGO: 0.885 - Medicine (miscellaneous) (Q1) - Biochemistry, Genetics and Molecular Biology (miscellaneous) (Q2) - Immunology and Microbiology (miscellaneous) (Q2)

Tipo y forma: Artículo (Versión definitiva)
Área (Departamento): Área Estomatología (Dpto. Cirugía,Ginecol.Obstetr.)

Creative Commons Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace.


Exportado de SIDERAL (2020-02-21-13:41:42)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Artículos



 Registro creado el 2017-09-11, última modificación el 2020-02-21


Versión publicada:
 PDF
Valore este documento:

Rate this document:
1
2
3
 
(Sin ninguna reseña)