Universidad de Zaragoza Repository

Resumen: In this work, wear behavior and microstructural characterization of porous layers produced in glass-ceramic substrates by pulsed laser irradiation in the nanosecond range are studied under unidirectional sliding conditions against AISI316 and corundum counterbodies. Depending on the optical configuration of the laser beam and on the working parameters, the local temperature and pressure applied over the interaction zone can generate a porous glass-ceramic layer. Material transference from the ball to the porous glass-ceramic layer was observed in the wear tests carried out against the AISI316 ball counterface whereas, in the case of the corundum ball, the wear volume loss was concentrated in the porous layer. Wear rate and friction coefficient presented higher values than expected for dense glass-ceramics.
Idioma: Inglés
DOI: 10.3390/ma6093963
Año: 2013
Publicado en: MATERIALS 6, 9 (2013), 3963-3977
ISSN: 1996-1944
Factor impacto JCR: 1.879 (2013)
Categ. JCR: MATERIALS SCIENCE, MULTIDISCIPLINARY rank: 80 / 246 = 0.325 (2013) - Q2 - T1
Financiación: info:eu-repo/grantAgreement/ES/MINECO/Consolider-Funcoat/CSD2008-0023
Tipo y forma: Article (Published version)
Área (Departamento): Ciencia de los Materiales e Ingeniería Metalúrgica (Departamento de Ciencia y Tecnología de Materiales y Fluidos)

You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

Exportado de SIDERAL (2017-06-12-09:14:07)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Articles > Artículos por área > Ciencia de los Materiales e Ingeniería Metalúrgica