An approach to the integrated design of PCM-air heat exchangers based on numerical simulation: a solar cooling case study
Resumen: A novel technique of design of experiments applied to numerical simulations is proposed in this paper as a methodology for the sizing and design of thermal storage equipment integrated in any specific application. The technique is carried out through the response surfaces in order to limit the number of simulation runs required to achieve an appropriate solution. Thus, there are significant savings on the time spent on the design as well as a potential cost saving on the experimentation if similarity relationships between the prototype and the model are met. The technique is applied here to a previously developed and validated numerical model that simulates the thermal behavior of a phase change material-air heat exchanger. The incorporation of the thermal energy storage unit is analyzed in the case of a solar cooling application, improving the system coefficient of performance. The economic viability is mainly conditioned by the price of the macroencapsulated phase change material.
Idioma: Inglés
DOI: 10.3390/resources4040796
Año: 2015
Publicado en: Resources (Basel) 4, 4 (2015), 796-818
ISSN: 2079-9276

Factor impacto SCIMAGO:

Financiación: info:eu-repo/grantAgreement/ES/MICINN/ENE2014-57262-R
Financiación: info:eu-repo/grantAgreement/ES/MICINN/ENE2008-06687-CO2-CON
Financiación: info:eu-repo/grantAgreement/ES/MICINN/ENE2011-28269-C03-01
Tipo y forma: Article (Published version)
Área (Departamento): Máquinas y Motores Térmicos (Departamento de Ingeniería Mecánica)
Exportado de SIDERAL (2017-07-31-10:28:00)

Este artículo se encuentra en las siguientes colecciones:
articulos > articulos-por-area > maquinas_y_motores_termicos



 Notice créée le 2016-09-29, modifiée le 2017-07-31


Versión publicada:
 PDF
Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)